Product Structure:

• Totally waterproof
• Double insulation
• Moulded terminations
• Extremely flexible

Product Model:

HZDG

Product Application:

In cold stores, after a certain time of operation, there is build up of ice on the cooler fins and a defrosting cycle must take place.
Electrical resistances are inserted between the fins to melt the ice, and the water is collected and passed through drain popes for disposal. Some meters if the drain popes are inside the cold store, so consequently the eater may freeze again.
To avoid this problem, a drain line heater is inserted into the pope. It is switched on only during the defrosting cycle.

Technical Data Sheet:

Remarks: It can be made according to the customers' demand.
Warning: These cables cannot be cut to reduce cold tail length
Note: The heating cables with 50W/m are most commonly used. For plastic popes however we recommend the use of heaters with 40W/m.